Forest Fire Prevention System、Forest Fire Prevention Monitoring System

ServiceService support

Hot Products

Solution

Contact information

Contact Number：0755 - 8651 8800 Skype：76024879 Mobile phone：13922881698 Email：sales@huaruicom.com

Home > Service> Technical Support

The remote control module of the forest fire protection system has a function introduction

Release Time：2017/07/07Number Views：1336Release Source：本站

Author：Shenzhen huaruicom Technology Co.Ltd.

Summary：It can control the horizontal and vertical rotation of the gimbal, and also features full-speed control; It can control the zoom, focus, and aperture of the lens in conjunction with the gimbal; It has a high-precision gimbal preset function, where each preset position can precisely set the horizontal rotation angle of the gimbal,

Key Words：

Supports pan and tilt control with full variable-speed functionality;

Supports synchronized control of lens zoom, focus, and iris;

Features high-precision preset positioning for pan/tilt and lens; each preset allows for precise configuration of pan angle, tilt angle, and focal length;

Supports the creation of automatic scanning paths by linking multiple presets, enabling unattended operation; multiple scanning paths can be configured;

Features variable-speed startup capability;

Supports both traditional analog-to-digital conversion and fully digital methods for preset information feedback;

Analog signal input resolution of 12-bit; supports up to 2,048 presets;

Integrates with forest fire detection software to automatically center and zoom in on fire hotspots for secondary verification;

Supports self-test functions for the pan/tilt unit and lens;

Equipped with both software and hardware watchdog functions to effectively prevent system crashes;

Includes "zero-position" setting and recording functions for the vertical axis;

Supports duplex data processing: simultaneous handling of feedback data and remote control commands;

Integrates with intelligent smoke/fire detection and a 3D GIS (Geographic Information System) for precise forest fire localization;

Multiple auxiliary control ports: provides over 7 auxiliary control interfaces (e.g., for camera IR-CUT filters, lens filters, and peripheral devices);

Pan/Tilt Unit: DC 24V

Camera: DC 12V/1A

Decoder Board: Max. DC 5V/0.5A

Prev：Differences Between CCD and CMOS in Security Cameras Next：Technical Standards for the Video Processing Module of Forest Fire Prevention and Monitoring Systems

WeChat

The remote control module of the forest fire protection system has a function introduction