Summary：Laser Night Vision Device Installation Precautions Warning: This is to remind users to be aware of potential dangers of death or serious injury.
1. Please read the instruction manual carefully before installing this device.
2. All warnings on the device and in the instruction manual should be followed.
3. Disconnect the power supply before wiping. Do not wipe with a damp cloth.
4. Please use accessories recommended by your dealer or our company.
Laser Night Vision Device Installation Precautions Warning: Users are advised to be aware of potential dangers of death or serious injury:
1. Please read the instruction manual carefully before installing this device.
2. All warnings on the device and in the instruction manual must be followed.
3. Disconnect the power supply before wiping. Do not wipe with a damp cloth.
4. Use accessories recommended by the dealer or our company; otherwise, malfunction may occur.
5. This device should use the power supply type and voltage recommended on the specification plate. If the power supply and voltage at the installation location are unclear, please contact the dealer or our company.
6. Protect the power cord, especially the plug and the camera's flexible cord.
7. Install a surge protector to prevent lightning strikes.
8. To avoid fire or electric shock, do not allow the installation cable to be excessively long, which could overload the device. Prevent foreign objects from entering the device and avoid splashing corrosive liquids onto the device to prevent danger.
9. Do not install on unstable brackets or walls, as this may result in injury to personnel and the device.
10. Opening or disassembling the protective cover may result in high-voltage electric shock or other hazards. Do not attempt to repair it yourself. For all repair matters, please contact our company.
11. When the laser illuminator is lit at night, installation and commissioning personnel must not look directly at the laser spot at close range (within 20 meters).
12. When replacing parts, please use parts approved by our company or parts with the same performance as the original components. Unapproved substitutes may cause danger.
13. Please contact our company in the following situations: a. Damage to the power supply or control lines. b. Use of the wrong power supply type or voltage. c. Damage to the casing due to being dropped. d. Abnormal performance of the equipment. e. If it still does not work properly after following the instructions.
ServiceService support
Hot Products
Solution
Contact information
