ServiceService support
Hot Products
Solution
Contact information
Laser night-vision devices operate based on principles categorized into two types: active and passive. Active night-vision systems utilize a near-infrared light source—such as an infrared LED, an infrared lamp, or a near-infrared laser—to illuminate the target. A low-light or starlight camera captures the infrared light reflected from the target, converts it into a video signal, and simultaneously displays the image on a monitor screen; devices functioning in this manner are known as active infrared night-vision devices.
Click View >
Laser Night Vision Device Installation Precautions Warning: This is to remind users to be aware of potential dangers of death or serious injury. 1. Please read the instruction manual carefully before installing this device. 2. All warnings on the device and in the instruction manual should be followed. 3. Disconnect the power supply before wiping. Do not wipe with a damp cloth. 4. Please use accessories recommended by your dealer or our company.
Click View >
A common question customers ask when purchasing infrared thermal imagers is: How far can an infrared thermal imager see? This is a crucial question, yet difficult to answer definitively. For example, a thermal imager might be able to see the sun at a distance of 146 x 10⁶ kilometers, but that doesn't mean its detection range is 146 x 10⁶ kilometers. However, this detection range is a crucial point that must be clarified, as customers buying infrared thermal imagers.
Click View >
The difference between CCD and CMOS in security cameras: CCD, short for Charge-Coupled Device, is a special semiconductor device containing many identical photosensitive elements, each called a pixel. A CCD is an extremely important component in a camera; it converts light into electrical signals, similar to how a human eye works.
Click View >
This is because your computer's IP address and the network camera's IP address are not on the same network segment. If the network camera's IP address is 192.168.1.126 and the subnet mask is 255.255.255.0, then your computer's IP address must be within the range of 192.168.1.0 to 192.168.1.254, and the subnet mask must be 255.255.255.0.
Click View >
IP network cameras utilize the international standard MPEG-4 video compression method.
Click View >
A network camera consists of a computer, video server, network interface card, surveillance pan-tilt unit and controller, operating system, and web server software. Consequently, there is no need for an additional PC or software; simply connecting the power supply and a LAN cable allows for remote video viewing. However, since a standard webcam lacks an internal server and relies on the user's PC operating system, it falls short in terms of performance areas such as security and image quality.
Click View >
Satellite remote sensing utilizes polar-orbiting meteorological satellites, land resource satellites, geostationary satellites, and low-orbit satellites to detect forest fires. These systems can identify hotspots, monitor fire spread, provide timely information on the fire situation, generate forest fire risk forecasts, and estimate the area burned using digital satellite data.
Click View >
Technical Support
MORE>
Common Problem
MORE>
